Operation Manual

38
Figure 3.31: Live Data Screen-Digital Display
You can change the display of the lines as follows:
 If the reading is a word (usually a switch reading), such as On, Off, OK,
etc., the display can only be in word format.
 If the reading is a number (usually a sensor reading), such as 1.1 V, 23.3
Amps, etc., then you can change the data display to either a graph or an
analog gauge.
b. About Graph Display
If the data reading is a number (usually a sensor reading), such as 14.4 V, 1.1
V, or 23 Amps, you can use the Graph/Graph Merge function buttons to
display the data in graph format. For example, see Figures 3.32 and 3.33.
Figure 3.32: Live Data Screen-Graph Display