Operation Manual

18
Prior to registration, please confirm your network is working properly.
Follow these steps to register the tool on our website:
1. Visit the website http://pro.autel.com
2. On the Sign In page, input your account ID and other information to log
in, if you already have an account.
3. If you are a new member to Autel and do not have an account yet, click
the Create Autel ID button on the left side.
4. Enter the required information in the input fields, read through Autel’s
Terms and Conditions and tick on Agree, and then click Create Autel ID
at the bottom to continue.
5. The online system will automatically send a confirmation email to the
registered email address. Validate your account by clicking the link
provided through the mail. A product registration screen opens.
6. Select the product model of your device, enter the product serial
number and password on the Product Registration screen, and click
Submit to complete the registration procedure.
NOTE: Please use the About function on Setup/Help application to find
out the Product Serial No. and Register Password. For details, please
refer to the Section 5.12 About.
7. Turn on the scan tool and wait 30 seconds for the registration message
to disappear. Then click on Update from the Home Screen to display the
Update window. Select the Exit button on the screen to shut down.
Figure 2.7: Exit Update program
8. Restart the scan tool to finish registration procedure.