Operation Manual

13
 Network - sets up the Ethernet network.
 Unit - sets the unit of measure.
 Date/Time - sets the date and time.
 Language - sets the default language for the scan tool software.
 Backlight - adjusts the backlight of the screen.
 Beep - sets the beep of the scan tool.
 Touch - calibrates the touch screen.
 Remote Desk - sets the remote desk.
 Workshop Info – provides information about workshop and mechanics.
 About - provides information about the scan tool, such as software
version, operating system software version, hardware version, product
serial No., etc.
For more information, refer to Chapter V System Setup.