Product Specs

10
(M6), insert two bolts (M6x14) into the screw holes, and then tighten bolts with the
hex L-wrench until the camera unit is secured.
Figure 3-6 Secure the Right Camera Unit
1. Remove the caps on the connectors of the long power supply cable and the long
signal cable.
2. Plug the long power supply cable connector into the power input port on the top of
the camera unit, and plug the long signal cable connector into the USB C port. Insert
the extra parts of two cables into the narrow slot beside the side segment.
Figure 3-7 Connect the Cables