Dragon Fish Quick Guide
Item List Fusel 9.
base battery statio x 4 pieces (the n actual quantity x1 is to the subject purchased kit) Charg wingtip er propeller + AC x2 line x1 base Feeder base statio x2 article n anten nas x2roo ts statio station tripod n tray x1base basex 1 charg TYPE C cable er x1root statio n x1a repair head tool x1a(head set models to the x1 actual sets purchase date) suit
wing document x1 x1parts (Dragon Fish, the base station, the ground station, the charger, battery fast guidelines disclaimer) tail Strap ground x1 stations x1a Recognize vehicle Dragon Fish DANGON FISH (hereinafter referred Dragon Fish) intelligent integrated channel excellence Flight control technology, gimbal technology, imaging technology, using a unique tilt-rotor design, quick release and efficient aerodynamic design of the whole machine, combines the dual advantages of multi-
spectral and third-party mounting, and supports PSDK to meet the needs of different customers. With Dragon Fish base station, high precision and accurate positioning can be achieved. Dragon Fish battery, IMU, barometer, compass, positioning system are all backed up, multiple redundancy, safe and reliable. 1. RTK antenna 2. Body paddle 3. Smart battery 4. Power button/indicator 5. Wing lock 6. Body motor 7. PTZ camera 8. Battery removal button 9. Front foot stand 10. Rear foot Frame 11.
14. Airspeed tube 15. Tilting wing tip 16. GPS 17. Ultrasonic ranging 18. Dust net 19. PTZ installation interface Understanding portable ground station Dragon fish is equipped with a 9.7-inch TFT-LCD capacitive touch screen, which is sensitive to the touch, and has a 2048*1536 ultra-highdefinition resolution. The highest brightness reaches 1000 cd/m², which is about twice that of ordinary mobile devices. The bright screen can still display images clearly under strong light.
8. Flight status indicator 9. Light sensor 10 Touch screen 11. Hook 12. Microphone 13. Photo/video button 14. Zoom button 15. PTZ horizontal control wave 16. Tripod mounting interface 17. Power button 18. Charging interface wheel19. USB interface 20. SD card slot 21. SIM card slot 22. HDMI interface 23. Custom buttons 24. Headphone jack 25.
1. WiFi indicator 2. Linking indicator 3. RTK indicator 4. Power indicator 5. Charging port 6. Linking button 7. Power button 8. Port cover 9. Antenna interface 10.
⒊Base Station Charging Set up the base station ⒈Unfold the tripod, install the base station tray, and lock the tray.
⒉Install the base station body to the tray, and tighten the lock on the tray nut. Ensure that the base station is level and stable.
⒊Install the antenna on the tripod, and connect the antenna feeder to the base station antenna port.
⒉Install the tail ⒊Install the wingtip propeller Before installing or removing the propeller, turn off the power switch of the aircraft (the picture shows the installation process of the marked propeller and the marked motor base) ⒋Install and mount align and mount Rotate the lock ring to the locked position
⒌Unlock the mount ⒍Install the intelligent flight battery turn on the power ︳Activate the aircraft ⒈Turn on the power of the base station Press and hold the power button for 1 second to turn on the base station
⒉Turn on the ground station power Long press the power button for 3 seconds to turn on the ground station.
⒋ activate the aircraft to open the Autel Voyager APP, click the activation button to activate the aircraft. The flight enters the Autel Voyager safe flight interface display. Before taking off, please place the aircraft on a flat ground with the tail facing you.
② Aircraft system status check ③ Simultaneously move the joystick in inner eight or outer eight ways and hold for 2 seconds to unlock the motor or
④ push up to the left Side stick (mode 2) The aircraft rises and automatically takes off ① Switch the ground station position to A position
② Click the Create mission button to plan the flight mission ③ Aircraft system status check
④ In-flight flight interface display specifications Aircraft size 2.2*1.1*0.45 weight (Excluding battery ,gimbal) 4.4kg maximum load 1.5 kg maximum take-off weight 8.5 kg working frequency 900Mhz, 2.4 GHz transmit power (EIRP) 2.4 GHz SRRC/CE/MIC/KCC: <20 dBm; FCC/NCC: <30 dBm 900MHz FCC: <30 dBm; Wi-Fi 2.4 GHz SRRC/CE/MIC/KCC: <20 dBm; FCC/NCC: <22 dBm 5.
SRRC/NCC/FCC: <22 dBm CE: <14 dBm hover Accuracy (P-GPS) Vertical: ±0.1 m (when the visual positioning is working normally) ±0.5 m (when the GPS is working normally) ±0.1 m (when the RTK positioning is working normally) Horizontal: ±0.3 m (when the visual positioning is working normally) ± 1.5 m (when GPS is in normal operation) ±0.1 m (when RTK positioning is in normal operation) When RTK position accuracy is at RTK FIX: 1 cm + 1 ppm (horizontal) 1.
flight time maximum 120 min IP rating IP43 GNSS GPS + GLONASS + BeiDou + working temperature -20 ° C to 50 ° C 9.7 inch strip Screen ground station operating frequency 902-928 MHz; 2.4-2.4835 GHz maximum signal effective distance NCC / FCC: 10 km (no interference, no obstruction) CE / MIC: 5 km SRRC: 5 km equivalent isotropic power (EIRP) radiation 902-928 MHz ≤30 dBm (FCC) 2.4-2.483 5 GHz ≤30 dBm (FCC); ≤20 dBm (CE); ≤20 dBm (SRRC) Wi-Fi protocol Wi-Fi Direct, Wi-Fi Display, 802.
storage space ROM 256GB + expandable (via micro SD card) video output interface HDMI interface USB-A interface supply voltage / 5V / 500m A current Working environment temperature -20℃ to 40℃ Storage environment temperature -20℃ to 60℃ (within one month) -20℃ to 45℃ (within three months) -20℃ to 30℃ (within one year) Charging Ambient temperature 0℃ to 45℃ Satellite positioning module GPS+GLONASS+Galileo three- mode size 319×233×74 mm (antenna folded) 319×398×74 mm (antenna unfolded) Weigh
For example, if the distance from the base station is 1 km, the accuracy is 1.1 cm. Positioning update rate 1 Hz, 2 Hz, 5 Hz, 10 Hz and 20Hz cold start <40 s hot start <10 s recapture <1 s initialization reliability > 99.9% differential data transmission RTCM 2.X/3.X format data Link image transmission, Wi-Fi operating frequency 2.4000-2.4835 GHz; 902-928 MHz equivalent isotropic radiated image transmission power (EIRP) 2.
Height difference between the end of 2m, and in the ground station 10m, height from the ground earth station 1.2 m) power consumption 7.5 W power supply 5 to 20V DC battery type: lithium polymer battery capacity: 4950 mAh energy: 57.1 WH working time > 7.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IC STATEMENT This device complies with Industry Canada’s licence-exempt RSSs.
