Manual

Figure 7.1

7.3 AC Voltage

While the tool in this mode, contact the probes to a circuit, then the

LCD display will read the AC voltage with a resolution of 0.02 volt.

Figure 7.2

NOTE: If the voltage is less than 3Volt, the result will display with

a resolution of 0.01volt.

7.4 Continuity

While the tool in this mode, contact the probes to a circuit, then the

tool will check the continuity of this circuit.

NOTE: If the resistance of circuit is less than 50 ohm, the scan tool

would display actual value and a beep would be heard.