Owner manual

24
8) When the update has finished, the scan tool will display a
message “Program Update has been done!”
9) Restart the scan tool to finish the whole update.
NOTE: When you made a wrong choice and the scan tool is unable
to work properly, you may need to update the programs. To hold
LEFT scroll button and power on the scan tool, you will enter the
Update Mode forcedly. Then follow the update procedure to refresh
the program.
3.9 About
The About function allows viewing of some important information
such as serial number and software version number of the scanner.
1) From Main Screen (Figure 3.1), use the UP/DOWN scroll
button and LEFT/RIGHT scroll button to select About and
press the OK button; wait for the About screen to appear.
2) View tool information on screen.
Figure 3.13
3.10 Vehicle Coverage
The AutoLink

AL519 OBDII/EOBD Scanner is specially designed
to work with all OBD II compliant vehicles, including those equipped
with next-generation protocol -- Control Area Network (CAN). It is
required by EPA that all 1996 and newer vehicles (cars and light