User Manual

Diagnostics Operations Diagnosis
43
are mostly in word form, like ON, OFF, ACTIVE, and ABORT, etc., can
only be displayed in Text Mode. Whereas reading of value parameters,
such as a sensor reading, can be displayed in text mode and other graph
modes.
Waveform Graph Mode – displays the parameters in waveform graphs
When displaying this mode, three control buttons will appear on the right
side of the parameter item, allowing you to manipulate the display status.
 Text Button – resumes Text Display Mode
 Scale Button – changes the scale values, which are displayed
below the waveform graph. There are 4 scales available: x1, x2, x4
and x8.
 Zoom-in Button – taps once to display the selected data graph in
full screen
Digital Gauge Mode – displays the parameters in form of a digital gauge
graph
Full Screen Display – this option is only available in the waveform graph
mode, and mostly used in Graph Merge status for data comparison.
There are three control buttons available on the top right side of the
screen under this mode.
 Edit Button – tapping this button opens an edit window, on which
you can set the waveform color and the line thickness displayed for
the selected parameter item.
 Scale Button – changes the scale values, which are displayed
below the waveform graph. There are 4 scales available: x1, x2, x4
and x8.
 Zoom-out Button – exits full screen display.
 To edit the waveform color and line thickness in a data graph
1. Select 1 to 3 parameter items to display in Waveform Graph mode.
2. Tap the Zoom-in Button on the right to display the data graph in
full screen.
3. Tap the Edit Button, an edit window appears.
4. Select a parameter item on the left column.