Application Guide

Figure 3.15
Some items may not be selectable, and the possible causes are as below,
- Programming or coding is not available for the control unit
- The control unit has error or needs to be replaced. Please refer to Initial Report
in CIP Main Interface for detailed information.
Tap 'OK' after making your selection and MaxiSys Pro will determine a plan. Please
refer to 3.1 Determine Measures Plan for additional information.
3.3 Selective Update
Please refer to 3.2 Complete Update for additional information about Selective
Update. Programming and coding items only for control units needing to be updated
are selected by default for Selective Update, which is the difference from Complete