Application Guide

Figure 2.1
For vehicles performed CIP function with MaxiSys Pro for the first time, please refer
to 2.1 Initial Entering CIP.
For vehicles performed CIP function with MaxiSys Pro before, MaxiSys Pro will save
the previous session automatically, and a prompt message will pop up to confirm
whether to use the saved session. Please refer to 2.2 Re-entering CIP for additional
information.
Note: MaxiSys Pro can only store up to 5 vehicle sessions. It will prompt you to
remove some unnecessary ones if there are more than 5 sessions. Please refer to 2.2
Re-entering CIP, as shown in figure 2.10.
2.1 Initial Entering CIP
MaxiSys Pro will read the current vehicle configuration information from CAS and
LM/FRM when entering CIP for the first time, so CAS and LM/FRM cannot be
replaced at the same time. Vehicle information will be shown as figure 2.2. You can