Application Guide

Figure 2.9
Tap 'Yes' to continue the saved session without establishing communication with
vehicle again. This will realize fast access to CIP. Tap 'No' to reject the saved session,
and MaxiSys Pro will establish communication with vehicle just as the procedure in
initial entering CIP. Please refer to 2.1 Initial Entering CIP for additional information.
It is recommended not to use the session saved long time ago for the actual
information of the vehicle may have changed.
MaxiSys Pro is set to only store up to 5 vehicle sessions. It will prompt you to remove
some unnecessary ones if there are more than 5 sessions, as shown in figure 2.10.