User Manual

80
4. Tap on the time to set time, you can use the + and – button or tap on the
numbers then the manual input screen will pop up. Tap Done to complete
the time setting.
NOTE
Internet connection is necessary for auto update, otherwise it would not work even if
you have already switch it on. Make sure the tool is connected to the Internet for the
time you have set.
8.1.5 Notification Center
This option allows you to turn the Notification Center function on or off. The
Notification Center function configures the MaxiCOM tablet to receive regular
on-line messages from the server for system update notifications or other
service information via the Internet. It is highly recommended to keep this
function on all the time, so you won’t miss out any new update for MaxiCOM or
event from Autel. Internet access is required for receiving on-line messages.
 To enable the Notification Center function
1. Tap the Settings application on the MaxiCOM Job Menu.
2. Tap the Notification Center option on the left column.
3. Tap the ON/OFF button to enable or disable the Notifications
function. If the function is enabled the button turns blue, or if
disabled the button turns gray.
4. Tap the Home button on the top left corner to return to the
MaxiCOM Job Menu. Or select another setting option for the
system setup.
When the Notification Center function is turned on, and new messages are
received by the MaxiCOM device, a notification message displays on the
MaxiCOM Job Menu. Press on the message bar and drag it down, and the
received messages are shown in the list, slide the list up or down to view all if
the message list covers more than one screen.
Tapping a specific message launches the corresponding application. For
example, if you tap on an Update notification message, the Update application
will be launched.