User Manual

126
Chapter 19 Maintenance and Service
To ensure that the MaxiCOM diagnostic tablet and the combined VCI unit perform at
their optimum level, we advise that the product maintenance instructions covered in this
section is read and followed.
19.1 Maintenance Instructions
The following shows how to maintain your devices, together with precautions
to take.
Use a soft cloth and alcohol or a mild window cleaner to clean the touch
screen of the tablet.
Do not use any abrasive cleansers, detergent, or automotive chemicals to
the tablet.
Maintain the devices in dry conditions and keep them within normal
operating temperatures.
Dry your hands before using the tablet. The touch screen of the tablet may
not work if the touch screen is moist, or if you tap the touch screen with
wet hands.
Do not store the devices in humid, dusty or dirty areas.
Check the housing, wiring, and connectors for dirt and damage before and
after each use.
At the end of each work day, wipe the device housing, wiring, and connectors
clean with a damp cloth.
Do not attempt to disassemble your tablet or the VCI unit.
Do not drop or cause severe impact to the devices.
Use only authorized battery chargers and accessories. Any malfunction or
damage caused by the use of unauthorized battery charger and
accessories will void the limited product warranty.
Ensure that the battery charger does not come in contact with conductive
objects.
Do not use the tablet beside microwave ovens, cordless phones and some
medical or scientific instruments to prevent signal interference.