User Manual

119
Chapter 18 Digital Inspection Operations
The Digital Inspection application configures the MaxiCOM Diagnostic Device to
operate as a digital video scope by simply connecting the tablet to a Digital Inspection
Camera. This function allows you to examine difficult-to-reach areas normally hidden
from sight, with the ability to record digital still images and videos, which offers you an
economical solution to inspect machinery, facilities, and infrastructure in a safe and
quick way.
WARNINGS & IMPORTANTS:
Follow these instructions to reduce the risk of injury from electric shock,
entanglement and other causes and prevent tool damage.
 Do not place the imager head and cable into anything or anywhere that may
contain a live electric charge or moving parts, which increases the risk of
electric shock or entanglement injuries.
 Do not use the imager head cable to modify surroundings, clear pathways or
clogged areas.
 When inspection is completed, carefully withdraw the imager head cable
from the inspection area.
 The imager head cable were waterproof to a depth of 3m (10’), greater
depths may cause leakage into the imager head cable and cause electric
shock or damage the tool.
 The working temperature of the imager head is between 32 °F (0 °C) and
113 °F (45 °C).
Check-Ups:
 FOR AUTOMOBILES: Ensure the automobile is not running during
inspection. Metal and liquid under the hood may be hot. Don’t get oil or gas
on the imager head.
 FOR PIPES: If you suspect a metal pipe could contain an electric charge,
have a qualified electrician to check the pipe before using.
 FOR WALLS: For inspecting the inside walls, be sure to shut off the circuit
breaker to the whole house before using the tool.
 WORK AREA: Ensure the work area has sufficient light.