Operation Manual

23
23
1) Use SCROLL button to select I/M Readiness from Diagnostic Menu and press
ENTER/EXIT.
• If more than one module is detected, you will be prompted to select a module
before test
.
• Use the SCROLL button to select a module and then press the ENTER/EXIT
button
.
2) Wait a few seconds while the code reader displays states of readiness monitors.
3) If the vehicle supports both types of tests, then both types shows on the screen
for selection.
............Diagnostic Menu......... ..
6/
8
5) View Freeze Frame
6) I/M Readiness
7) Vehicle Info.
8) Exit
Transmission
MS309 Manual_V1.01.fm Page 23 Wednesday, January 7, 2009 2:42 PM