Operation Manual

17
17
4.2 Reading Codes
1) Use SCROLL button to select Read Codes from Diagnostic Menu and press
ENTER/EXIT button.
diagnostic menu continued...
• If more than one module is detected, you will be prompted to select a module
before test.
• Use SCROLL button to select a module, and press ENTER/EXIT button.
2) View DTCs and their definitions on screen.
• The control module number, sequence of the DTCs, total number of codes
detected and type of codes (Generic or Manufacturer specific, Stored or
Pending codes) will be observed on the upper right hand corner of the display.
.............Diagnostic Menu....... ...
2/
8
1) System Status
2) Read Codes
3) Erase Codes
4) Live Data
............Diagnostic Menu......... ..
5) View Freeze Frame
6) I/M Readiness
7) Vehicle Info.
8) Exit
Transmission
MS309 Manual_V1.01.fm Page 17 Wednesday, January 7, 2009 2:42 PM