Operation Manual

11
11
3.2 Specifications
1) Display: Backlit, 128 x 64 pixel display
2) Operating Temperature: 0 to 60°C (32 to 140 F°)
3) Storage Temperature: -20 to 70°C (-4 to 158 F°)
4) Power: 8 to 18 Volts provided via vehicle battery
5) Dimensions:
Length Width Height
110.3 mm (4.34”) 69.5 mm (2.74”) 20.2 mm (0.80”)
6) 0.18Kg (0.39lb), GW: 0.21Kg (0.46lb)
3.3 Accessories Included
1) User’s Manual -- Instructions on tool operations.
2) OBDII cable -- Provides tool power and communicates between tool and vehicle.
3) USB update cable -- allows easy update via a PC and an internet connection.
3.4 Navigation Characters
Characters used to help navigate the code reader are:
1) --Indicates current selection.
2) “Pd” --Identifies a pending DTC when viewing DTCs.
3) “$” --Identifies the control module number from which the data is retrieved.
3.5 Vehicle Power
The power of the code reader is provided via the vehicle Data Link
Connector (DLC). Follow the steps below to turn on the code reader:
1) Locate Data Link Connector on vehicle
2) Connect the code reader’s OBD II plug to the vehicle’s Data Link Connector.
• A plastic DLC cover may be found for some vehicles and you need to
remove it before plugging the OBDII cable.
3.6 Product Setup
The code reader allows you to make the following adjustments and settings:
1) Language: Selects desired language.
2) Unit of measure: Sets the unit of measure English or Metric.
3) Contrast adjustment: Adjusts the contrast of the LCD display.
MS309 Manual_V1.01.fm Page 11 Wednesday, January 7, 2009 2:42 PM