User's Manual

10 11
① Antennas
• The left antenna transmits 5.8GHz RF signal to the
aircraft for sending commands and receiving ight
information.
• Both antennas receive 2.4GHz WiFi signal (X-Star)
or 900MHz HD video signals (X-Star Premium)
from the aircraft and transfer the ight data and
camera data to the connected mobile app.
② Mobile Device Holder
Holds the mobile device with a 180° adjustable
viewing angle for optimum visibility.
③ Flight Information Panel
Displays the ight status, warning messages and
real-time instructions. ( 13)
④ Left Command Stick
Set by default:
Upward / Downward and Turn Left / Turn Right
⑤ Right Command Stick
Set by default:
Forward / Backward and Move Left / Move Right
⑥ Strap Hole
Attached to a neck strap for easy portability.
⑦ Motor Starter
Starts the motors.
⑧ Take-off/Landing Button
Commands the aircraft to take off or land.
⑨ Power Button
Press and hold for 2 seconds to turn on/off the
remote controller. You will hear a buzz sound. The
power button shows a solid green light when you turn
on the remote controller.
⑩ Go Home Button
Commands the aircraft to return to the home point.
⑪ Pause Button
Commands the aircraft to stop moving temperarily
and hover in position when necessary.
⑫ Power Port
Connected to the X-Star/X-Star Premium charger
to charge the built-in battery of the remote controller.
Camera
The X-Star and X-Star Premium are both equipped with a 4k UHD camera. The
camera supports various shooting modes including single shot, burst shooting,
AEB and time lapse. Videos can be recorded in MOV or MP4 formats, and photos
can be saved in JPG or DNG formats. An HD live view from the camera can be
displayed on your mobile device through the mobile app Starlink
TM
.
Remote Controller
The remote controller enables wireless communication with the aircraft through
a 5.8GHz radio frequency band. The maximum working range of the remote
controller in an open area is about 500m when set as CE standard, or about
1000m (X-Star)/2000m (X-Star Premium) when set as FCC standard.
The built-in 2.4GHz WiFi module of the X-Star remote controller and 900MHz HD
video streaming module of the X-Star Premium remote controller allow video
downlink from the aircraft for real-time ight and video data displayed on the app,
enabling convenient control of aerial photography and remote piloting.
IMPORTANT
The X-Star network is only established when the aircraft, the remote
controller and the mobile device are properly connected through the WiFi
network (X-Star) or HD video streaming (X-Star Premium).
Functionality Description