User's Manual

8 9
the side of this module with another hand.
3. Slide the Quick-mount Module out towards the Unlock direction
( ) indicated beside the Unlock button.
¾ To install the gimbal
1. Match the Quick-mount Module attached to the gimbal and the Quick-
mount Base at the bottom of the aircraft.
2. Slide the Quick-mount Module onto the Quick-mount Base towards the
Lock direction ( ) indicated beside the Unlock button. You will hear
a clicking sound when the gimbal is properly installed.
XI-5S Gimbal
The XI-5S camera gimbal is a quick-mount stabilized gimbal with three axes.
It is specially designed to minimize camera vibration and deliver smooth aerial
photographing.
It is powered through the aircraft battery, and therefore turned on at the same
time with the aircraft. A self-test is performed each time when the gimbal starts up.
① Quick-mount Module ③ Aircraft Communication Port
② Vibration Absorber ④ Micro-SD card Slot
NOTE
• A Micro-SD card is provided inside the Micro-SD card slot with different
storage capacity according to your aircraft model.
• The XI-5S Camera Gimbal is attached with a gimbal holder which
protects the gimbal from incidental rotation to avoid damage. Remove
the holder before powering up the aircraft ( 20).
The XI-5S camera gimbal for X-Star/X-Star Premium supports 2 working modes:
Stabilized Mode – enables stabilized camera tilting control for creative aerial
photography by synchronizing the gimbal yaw movement with the aircraft.
FPV Mode – synchronizes the gimbal roll and yaw movements with the aircraft to
provide a real-time video piloting experience from a rst person view.
¾ To remove the gimbal
1. Hold the aircraft with one hand.
2. Hold the Quick-mount Module and press the Unlock button ( ) at