User's Manual

62 63
pilots’ safe and legal operations of the product. The ight restricted areas are
divided into 2 protection categories.
Category I: Major airports and ight areas where manned aircrafts operate at
low altitudes
• Take-off Restricted Zones (No-Fly Zones)
These areas are set within 2.4km around the central point of specied airports.
• Altitude Restricted Zones
In these areas, the aircraft is only allowed to y within limited altitudes. From
8km to 2.4km around the airport’s central point, the ight altitude decreases
progressively from 120m to 10.5m.
• Warning Zones
Once the aircraft enters a region within 8.1 km from the central point of the
airport, the app will prompt a warning message.
NOTE
If the aircraft enters any Altitude Restricted Zones, its maximum
allowable altitude will be reduced accordingly. If the aircraft enters any
Take-off Restricted Zones, it will land automatically. You should pay
special attention to the warning messages displayed on your app.
Category II: Sensitive areas and institutes such as military sites and border lines
between countries
• Take-off Restricted Zones (No-Fly Zones)
These areas are set within 1km around the center of the specied sites where
take-off and ight are prohibited.
• Warning Zone
Once the aircraft enters the region within 2km from the center of the site, the
Appendix
Regulatory Compliance and Flight Restricted Area
Compliance and Advisory
FCC Compliance
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference thay
may cause undesired operation.
FCC Radiation Exposure Statement
This device abides by FCC radiation exposure limits releasing for an uncontrolled
environment. The minimum distance between the radiator and the user is
designed to be 20cm when the aircraft and its accessories are in function. It is
also forbidden to co-ordinate any other transmitter or antenna with this transmitter
in use.
Autel Robotics announces that the X-Star and X-Star Premium are in compliance
with the essential requirements and other relevant provisions of Directive 1995/5/
EC.
IC RSS Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference, including
interference thay may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RF radiation exposure limits set forth for an
uncontrollable environment. This transmitter must not be co-located or operating
in conjunction with any other antennas or transmitter. This equipment should be
installed and operated with at least 20cm between the radiator and your body.
Any changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Flight Restricted Area Illustration
The X-Star and X-Star Premium system automatically recognizes the Flight
Restricted Area, in which ights are limited by default. This feature guarantees