User's Manual

54 55
NOTE
For your own safety, the Low Battery Warning cannot be set below
25%, i.e., the minimum battery level for Go Home; and the Critical
Low Battery Warning cannot be set below 15%, i.e., the minimum
battery level for landing.
z Gimbal Settings
This section allows you to adjust gimbal settings.
1. Gimbal Mode
Choose a working mode for your gimbal from Stabilized mode and PFV
mode. ( 8)
2. Adjust Gimbal Roll
You can adjust the roll axis of your gimbal slightly while watching the
camera view to nd the best angle for your photography.
z General Settings
1. Parameter Unit
Choose your preferred unit system: Imperial or Metric.
2. Tutorial
Slide this button to display or hide the tips for your operation.
3. Map
• Show Flight Route
Slide this button to display or hide your ight route on the map.
• Calibrate Coordinates (For Mainland China)
Slide this button to enable or disable the map calibration.
section.
NOTE
To reset the WiFi video link, toggle the Flight Mode Switch back and
forth quickly for at least 4 times. The remote controller will make a
beep sound when the WiFi SSID and password have been reset to
the default values.
For the X-Star Premium, you can check the noise condition of each channel
and choose the one with minimum noise.
z Aircraft Battery Settings
You can also enter this section by tapping ( ) on the Aircraft Status
Bar. This function allows you to view the current status and general
information of the aircraft battery. Low Battery Warning and Critical
Low Battery Warning settings are also available in this section.