User's Manual

52 53
Indicator Icons Aircraft Movement
Ascend Descend
/ / Nose rotates left Nose rotates right
Move forward Move backward
Move left Move right
5. RC Language
Set the language displayed on the LCD Flight Information Panel.
6. Teaching Mode
This mode creates a simultaneous connection between an aircraft and two
remote controllers for teaching purposes. One of the remote controllers
(which is bound with the aircraft) is set as Learner, and the other is set
as Instructor. When Instructor is operating, Learner’s functions will
be disabled automatically (excluding the Gimbal Pitch Dial). This helps
Instructor to demonstrate the operation methods and gain control of the
aircraft from Learner in an emergency.
To activate Teaching Mode, connect two remote controllers with a
CAN cable, and designate them on the app respectively. To designate
the remote controller as Learner, connect your mobile device to
the remote controller bound with the aircraft and tap the Learner
button on the app (Settings > Remote Controller Settings
> Teaching Mode). To designate the other remote controller as
Instructor, disconnect your mobile device from Learner and connect it
to the other remote controller, or use another mobile device to connect it,
then tap the Instructor button on the app. Instructor and Learner can
be set in a random order.
NOTE
To connect your mobile device and the remote controller, you
need to use WiFi for X-Star and a USB cable for X-Star Premium.
( 24)
z Video Link Settings
For the X-Star, you can rename the WiFi SSID and reset the password in this
I. Release the two command sticks and the Gimbal Pitch Dial to their
central position and tap Start.
II. Push both command sticks and turn the Gimbal Pitch Dial to their
complete range of motion. The progress bars will be in response to
your calibration. Below is an example for illustration.
III. After each bar has been highlighted 100%, tap Finish and your
remote controller calibration is completed.
3. RC Binding
Press the Bind button and then hold the RC Binding Button on the
aircraft for 3s as instructed on the app to bind your aircraft and remote
controller. You will be prompted when this is done successfully.
4. Command Stick Mode
Choose a command stick mode to control your aircraft. There are 3 modes
available: Mode 1, Mode 2 and Mode 3, controlling the aircraft in different
manners. Below are the illustrations of these 3 modes.