User's Manual

50 51
6. Go Home Altitude
Set a safe altitude for your aircraft to Go Home automatically in case of
an emergency. If you set the Go Home Altitude to a certain value, the
aircraft will adjust its altitude to this value before returning to the home
point. The default Go Home Altitude is 30m.
7. Advanced Settings
• Enable ATTI Mode
Switch this button on so you can activate ATTI mode on the remote
controller directly, as this mode is disabled by default to prevent
accidental disabling of GPS mode.
• IOC Mode
You can choose from Home Lock and Course Lock as you need.
( 31)
• Front LED Indicator Lights
Slide this button to turn on or turn off the two red front LED indicator
lights. These LEDs help you to identify the aircraft’s nose direction
during ight.
• Read Flight Data
Connect your aircraft to a computer with a USB cable to read the ight
data. Then you need to reboot the aircraft before use.
z Remote Controller Settings
The Remote Controller Settings function grants access to Gimbal Pitch
Dial Speed, RC Binding, RC Calibration, Command Stick Mode and RC
Language Settings and Teaching Mode.
1. Gimbal Pitch Dial Speed
Slide the scroll bar left or right to adjust the speed of the Gimbal Pitch
Dial on the remote controller.
2. RC Calibration
This function includes the calibration of the Left Command Stick, Right
Command Stick and Gimbal Pitch Dial. You will only need to calibrate
your remote controller when using it for the rst time or after your remote
controller has been replaced.
The horizontal bar on the upper part of the screen represents the Pitch
Control Dial, and the two crossed bars on the sides represent the left and
right command sticks.
¾ To calibrate the remote controller
Settings
Tapping the Settings icon ( ) on the General Informaton Bar allows you to
adjust 6 categories of settings displayed on this menu, including Flight Control
Settings ( ), Remote Controller Settings ( ), Video Link Settings
( ) , Aircraft Battery Settings ( ), Gimbal Settings ( ) and General Settings
( ).
z Flight Control Settings
In Flight Control Settings, you can manage the following settings:
1. Compass Calibration
Please refer to details on Page 24.
2. Beginner Mode
Slide this button to enable or disable Beginner Mode. This mode has
a xed maximum ight altitude (30m), distance (100m) and speed
(horizontal: 6m/s, ascent: 4m/s, descent: 1m/s) designed to keep
beginners’ ights safe.
NOTE
When Beginner Mode is activated, the motors cannot be
started in non-GPS mode.
3. Flight Speed
Set a horizontal speed when Beginner Mode is disabled. (defalt: 15m/s)
4. Altitude Limit
Set a maximum altitude for your ight when Beginner Mode is disabled to
protect the aircraft from losing signal or ying out of sight. (default: 120m)
5. Distance Limit
Slide this button to enable or disable the default distance limit (800m)
when Beginner Mode is disabled.
NOTE
When the altitude and distance limits are determined, the
aircraft cannot y outside the preset boundaries under GPS
mode. In non-GPS mode, the aircraft is only restricted to the
preset altitude limit; the distance limit under non-GPS mode
may vary depending on the regulations and laws in different
areas and countries.