User's Manual

44 45
3. A Go Home Altitude setting will pop up for you to set a safe altitude for
the aircraft to perform Go Home at low battery level. Once you click OK,
your aircraft will initiate Autopilot.
4. Use the left and right command sticks to adjust the position of the aircraft
as illustrated on the right side of the screen. You can change the orbit
direction (CW/CCW) or turn the aircraft’s nose towards the POI (Face POI) .
5. Tap Pause to let the aircraft hover, or tap Exit to exit Orbit mode.
NOTE
The orbit radius can only be set between 10m and 100m. When ying
within 10m or beyond 100m radius centering the POI, the aircraft will
adjust its orbit radius to 10m and 100m respectively.
z Follow Mode
In Follow mode, the aircraft tracks you as you move with its nose pointing at
you. The speed will depend on your moving speed but cannot exceed the ight
speed you set in the app: Settings ( ) > Flight Control Settings ( ) >
Flight Speed.
The table below illustrates how to control the relative position of the ai rcraft
• Aircraft: The current location of the aircraft
• Me: Your current location
• New: Pin a new point within a safe round zone displayed on the map
2. Follow one of the methods below to set the orbit radius before starting
the program.
A. Move your aircraft from the current location O to your desired location
R to set the orbit radius.
POI Orbit Radius
Aircraft
Distance between O and R.
Me Distance between you and R.
New
Distance between R and the point you choose on the map.
B. Tap on the top box in the right panel on the screen to input a number
to manually adjust the orbit radius between the aircraft and the POI.
Then decide the laps, the orbit direction (CW/CCW), and whether the
aircraft is to Hover or Go Home when Orbit is nished. The aircraft
will automatically face the POI when you initiate Orbit mode. You can
still control the camera any time you wish. Click Start when ready.