User's Manual

42 43
The three function icons on the right provide different options for you to view
the map:
Icon Name Function
Location
Choose the area around the home point.
Choose the area around the aircraft’s location.
Compass
Lock/unlock the compass of the map.
Map View
Choose a map view from Normal, Hybrid and Satellite
view.
Autopilot
The Autopilot function includes a series of smart ight modes that command
your aircraft to y in a specic pattern automatically, providing a carefree piloting
experience for you. Tapping ( ) leads you to the Autopilot options below. The
( ) button on the upper right corner grants access to the instructions for each
mode:
IMPORTANT
During Autopilot Mode, please always keep a clear path for the aircraft as
it cannot avoid obstacles that come into the ight path autonomously.
z Orbit Mode
When Orbit mode is activated, the aircraft ies in a circle with the camera xed
on a point of interest (POI). Please follow the app to perform Orbit:
1. Choose a POI you prefer from below:
WARNING
The Format SD Card option in Camera Settings will format
the inserted SD card. Make sure to back up your les
beforehand. For whatever reasons, Autel Robotics will not
be responsible for any unrecorded or unreadable image or
video.
z General Information Bar
SETTINGS
Tap this icon to open the Settings page where you can manage
Flight Control, Remote Controller, Video Link, Aircraft Battery,
Gimbal and General Settings. ( 50)
SYSTEM STATUS
Displays the real-time status of your aircraft.
FLIGHT MODE
The information displayed on this icon varies depending on the
current ight mode of the aircraft, including GPS, ATTI, IOC,
Follow, Orbit, Failsafe, etc..
GPS SIGNAL
Displays the current GPS signal strength.
z Map Split Screen
In the FPV interference, you will see a smaller split screen at the bottom left
displaying the map of the surrounding area of your aircraft. Tap on this screen
to switch to the map view as shown below.
To view different areas, you can zoom in, zoom out or move
the map.