User's Manual
38 39
① Flight Control Panel ④ General Information Bar
② Aircraft Status Bar ⑤ Map Split Screen
③ Camera Operation Panel
z Flight Control Panel
AUTOPILOT
Command the aircraft to y automatically according to the
intelligent ight mode you have selected, including Orbit, Follow
and Waypoint modes. ( 44)
TAKE-OFF / LAND
Command the aircraft to take off or land.
GO HOME
Command the aircraft to return to the specied home point.
HOME POINT
Choose a new location as your home point. Options include the
location where you are standing ( ) and the real-time location
of the aircraft when you tap this icon ( ). The rear LEDs of the
aircraft will ash green light quickly for 3 seconds, indicating that
the home point reset is successful.
z Aircraft Status Bar
DISTANCE
The horizontal distance between the aircraft and the home point.
ALTITUDE
The altitude of the aircraft relative to the home point level.
FLIGHT SPEED
The current ying speed of the aircraft.
REMAINING TIME
The remaining time for the aircraft to y.
BATTERY LEVEL
The current battery level of the aircraft.
Slide the center of the screen to choose your aircraft and tap this button to follow
the pop-up instructions to connect your mobile device. When your connection is
successful, this button turns to green and displays Connected.
NOTE
When your aircraft is used for the rst time, you will be guided to the
registration page after the connection is completed. Please follow the on-
screen instructions to activate your X-Star/X-Star Premium:
1. Create an account and set a password for your account.
2. Name your X-Star/X-Star Premium.
3. Select a Command Stick Mode, Parameter Unit and System.
4. Conrm that the Beginner Mode is enabled. This mode is enabled
by default when you use the product for the rst time, and you may
disable Beginner Mode through the app: Settings ( ) > Flight
Control Settings ( ) > Beginner Mode ( 51).
Enter the camera screen for a First Person View.
When your mobile device has been connected to the aircraft, the system will run a
self-check to ensure it is safe to y. You can check the overall status in a prompted
window and eliminate the abnormal conditions before your ight.
First Person View (FPV)
This interface synchronizes your screen display with the on-board camera for a
real-time rst person view, allowing you to perform various camera operations
and congurations for aerial photography.