User's Manual

30 31
Smart Flight Features
z Intelligent Orientation Control (IOC)
To activate the IOC function during
ight, slide the Flight Mode Switch
at the side of the remote controller
to the left.
IOC mode is also known as Carefree Mode. It is used to keep the aircraft’s
direction controls locked regardless of its nose direction. It is most useful
when you are unable to observe the nose direction of the aircraft. IOC works
only in GPS mode, and has 2 control modes: Home Lock and Course Lock.
Home Lock
The Forward/Backward and
Move Left/Right command
stick controls are always in the
radial or tangential directions
of the aircraft position relative
to the home point regardless
of the aircraft nose direction.
Course Lock
The Forward/Backward and
Move Left/Right command
stick controls are set in the
parallel and perpendicular
directions, respectively, to
the reference line between
the home point and the point
where the IOC is activated
regardless of the aircraft nose
direction.
NOTE
• The ight direction is relative to the home point instead of the
location of the pilot.
• IOC mode can only be activated when the aircraft is at least 10
meters away from you.
B. Rotate Left/Rotate Right – commands the heading of the aircraft to
rotate left or right by pushing the stick left or right.
z Right Command Stick
A. Forward/Backward – commands the aircraft to move forward or
backward by pushing the stick upward or downward.
B. Move Left/Move Right – commands the aircraft to move left or right by
pushing the stick left or right.
NOTE
The controls illustrated above are set as the default command stick
mode (Mode 2). The left command stick controls aircraft ascent/
descent and left/right rotation; The right command stick controls
aircraft forward/backward and left/right sideway movements. You can
change the control settings via the app: Settings ( ) > RC Settings
( ) > Command Stick Mode. ( 53)