User's Manual
26 27
4
Flight Operations
After all pre-ight preparations have been done properly, take a few minutes to
familiarize yourself with the controls of your X-Star/X-Star Premium by following
the operation instructions described in this section before ying.
IMPORTANT
Before ying the X-Star/X-Star Premium aircraft, make sure those who
operate or come into contact with this product have read and understood
all safety instructions presented throughout this manual.
Preight Checklist
Follow the steps below to carry out a full preight check-up to maximize safety.
• The aircraft battery, the remote controller and the mobile device are fully charged
• The gimbal holder is removed.
• The propellers are properly installed and are in good condition.
• The antennas of the remote controller are unfolded and well adapted for a
good position to obtain the best transmission quality ( 28).
• The aircraft and the remote controller are bound.
• The mobile app is properly installed and your mobile device is connected to
the aircraft.
• The camera view on the X-Star mobile app is synchronized with the mounted
camera.
• The rmware has been updated to the latest version.
• Familiarize yourself with the ight controls.
• Your ight area is an open, unobstructed and uncrowded area.
NOTE
• When the mobile app displays instructions or alerts, please perform
the required task in time to ensure your operation can be carried out
successfully.
• You can also start the calibration
process with the remote controller
by pressing ( ) and ( )
simultaneously for 2 seconds. Then
continue to perform Steps 2 and 3 to
complete the procedure.
WARNING
• If the calibration is unsuccessful, the 4 LEDs on the aircraft will illuminate
solid yellow light. In this case, repeat the above steps to try again.
• If severe drifting occurs during ight or the aircraft seems unstable for
any reason, please land immediately.