User's Manual

18 19
¾ To remove the battery
1. Make sure the battery
is powered off before
removal.
2. Press and hold the top
and bottom tabs on
the battery, and pull it
out slowly.
Charging
The aircraft battery and the remote controller can be charged simultaneously with
the charger supplied in the X-Star/X-Star Premium package.
¾ To charge the aircraft and remote controller
1. Remove the battery from the aircraft and connect it to the charger.
IMPORTANT
• The aircraft battery should be fully charged before use for the
rst time.
• If the current battery level is ≥80%, turn on the battery before
charging.
2. Connect the charging cable to the Power Port on your remote controller.
3
Preparing the Flight
The X-Star/X-Star Premium features a user-friendly design that requires very
simple assembly to get the aircraft ready to y. However, it is essential to read and
follow all the instructions and warnings in this manual prior to assembly, setup or
use, in order to operate safely.
WARNING
Do not use incompatible components or alter this product in any way
inconsistent with this manual. Failure to operate this product in a safe and
responsible manner could result in injury or damage.
Preparing the Battery
Installing and Removing the Aircraft Battery
¾ To install the battery
1. Make sure the battery
is powered off before
installation.
2. Insert the battery into
the aircraft battery
compartment as
shown on the right.
The battery will rmly
click in when it is
properly installed.