User's Manual

16 17
G-●:
Simply press the button shortly to activate the Pause function
○:
1s after you release each button
Remote Controller Buzzer Alerts
The built-in buzzer of the remote controller makes different alert sounds according
to various status alarms, such as low battery warning, video link error or lost
aircraft communication. The different alerts are described below.
Remote Controller Buzzer Alerts
Aircraft Low Battery Warning
(about 25%)
1 quick beep every second (lasts for 5s),
with 2 RC vibrations
Aircraft Critical Low Battery Warning
(about 15%)
5 quick beeps every second (last for 5s),
with 5 RC vibrations
RC Low Battery Warning (10%)
1 quick beep every second (lasts for 5s)
RC Critical Low Battery Warning (5%)
5 quick beeps every second (last for 3s),
with 2 RC vibrations
Aircraft & RC Communication Lost
2 quick beeps every second (last for 5s),
with 1 RC vibration
Video Link Disconnected 3 quick beeps in 1 second
Compass Interference 3 beeps with 3 RC vibrations
Standby Notication Tone 3 beeps every 15 minutes of inactivity
The following table describes the denitions of the indicator light status.
●
Indicates solid light
R
Indicates red colored light
◎
Indicates ashing light
G
Indicates green colored light
○
Indicates no light
Y
Indicates yellow colored light
Example: “R-●” stands for SOLID RED light.
G-●:
A. Sufcient battery when RC is in use
B. Fully charged in charging state with power on
G-◎:
In charging state with power on
Y-●: Low battery warning
R-●: In charging state with power off
R-◎: In process of RC rmware upgade
○：
A. Fully charged in charging state with power off
B. Power off while not in charging state
G-●: Activate each button by holding for 2s until you hear a beep sound
○:
1s after you release each button
G-◎:
(Go Home
Button)
The aircraft is performing the Go Home procedure