User manual

󾙓󾙔

· Add waypoint

After adding a waypoint, click the waypoint again to edit the waypoint parameters or delete the

waypoint. The last waypoint added by the multi-rotor device is the end point by default. While the

ﬁxed-wing device generates the waypoint, it also generates the route, return point, ascending circle

point and descending circle point.

· Add observation points

Click the observation point icon ( ) at the bottom of the conﬁguration interface to conﬁgure the

observation point parameters.

When the ﬁxed-wing aircraft ﬂies within the ﬂight segment associated with the observation point or

within the action radius of the observation point, the gimbal will face the observation point; when the

multi-rotor aircraft reaches the waypoint associated with the observation point, the gimbal will face the

observation point.