Quick Guide

RTK indicator light Description
Green: Number of satellites>16, good signal (normal flight)
Yellow: Number of satellites 6-15, poor signal (it is recommended to adjust the base
station to an open area)
Red Slow flashing: number of satellites <6, poor signal (recommend the base station
to be placed in an open area)
Light off: no RTK signal (indoors or abnormal base station RTK)
use to
connect to a ground station or aircraft
connection method
Take the normal mode as an example, the specific operation is as follows.
Connect the ground station to the base station
1、 turn on the power of thestation;
2、 turn on the remote control and run the Autel Voyager App, select "Settings ->
Base Station", you can see the base station wifi hotspot after entering, enter the
password: 12345678, wait a few seconds until the remote control is successfully
connected to the base station;;
3、 exitSetting interface, enter the mission flight interface, click the gear icon in the
upper right corner, enter the settings menu, click "remote control", and turn on