Quick Guide

Red: Electricity>10%
Red flashing slowly: Electricity <10%
charging methodcharge
When using thefor the first time, be sure to fullythe battery. Please use a dedicated
charger to charge the base station.
1、 Plug the Type-C power cord into the Type-C port of the base station, and the base
station will automatically enter the charging mode (either when it is turned on or
off).
2、 When charging, the base station power indicator light flashes, and the battery
power is indicated by different colors. When connected to a charging power
source, the base station power indicator light is steady green to indicate that it is
fully charged.
Turn on/off the base station
Turn on
The base station has 2 working modes, namely normal mode and disabled RTK mode,
which can be used in different operating scenarios. Follow the instructions below to
turn on the base station and enter different working modes.
1. When the base station is off, press and hold the power button for 1 second to enter
the normal mode.
2. When the base station is off, press and hold the power button for 3 seconds to
enter the disabled RTK mode. When entering, the buzzer will beep 3 times and the
RTK indicator will be steady red.
Turn off
Long press the power button for 1 second to turn off the