User manual

Table Of Contents

Compass Calibration

When calibrating the compass, please make sure there are no metal objects around to prevent

interference.

Advanced Settings

Front LED indicators – You can toggle the switch to turn on or off the front LED indicators.

EXP – This parameter is used to control the aircraft's rotation speed when you push the

command stick. Command stick mode 2 is used in the following instructions to illustrate how to

adjust EXP:

Drag your finger across the screen in the pattern of the

green curve toward the blue dot, as shown in the right figure.

Push the left command stick to the right. The aircraft will

rotate right, slowly at first, then quickly.

Drag your finger across the screen in the pattern of the

green curve toward the blue dot, as shown in the right figure.

Push the left command stick to the left. The aircraft will

rotate left, slowly at first, then quickly.

Drag your finger across the screen in the pattern of the

green curve toward the blue dot, as shown in the right figure.

Push the left command stick to the right. The aircraft will

rotate right, quickly at first, then slowly.

Drag your finger across the screen in the pattern of the

green curve toward the blue dot, as shown in the right figure.

Push the left command stick to the left. The aircraft will

rotate left, quickly at first, then slowly.