User manual

Table Of Contents
Hold the aircraft horizontally and rotate it
until the rear LED indicators on the aircraft
turn solid green.
2
360°
52
Hold the aircraft vertically with the nose facing
downward and rotate it until the rear LED indica-
tors on the aircraft turn solid green, indicating
that the calibration is successful.
3
360°
Flight Mode
The Aircraft automatically selects the most suitable flight mode based on the GPS signal strength.
IMU
This option enables you to monitor the status of the inertial measurement unit (IMU) of the aircraft.
Command Stick Mode
After the aircraft self-check completes the screen will display the current command stick mode. You
can also choose a different command stick mode to control your aircraft. There are three modes
available: Mode 1, Mode 2, and Mode 3 to control the aircraft in different manners. The following
figures show these 3 command stick modes.
The following table describes the icons in these command stick modes.
Mode 1 Mode 2 Mode 3
Autel Robotics 2020 All Rights Reserved.