User manual

51
Compass Calibration
Follow the steps below to calibrate the aircraft compass.
Tap the Calibrate button on the screen, follow the on-screen instructions that help you monitor
the calibration status. The rear LED indicators on the aircraft will turn flashing yellow when you
initiate the calibration process.
1
7 Aircraft Status Settings
After the aircraft self-check completes, the Aircraft Status screen will display some important
functions and parameters allowing you to perform configurations for the Aircraft.
NOTES:
If any of the following conditions are detected the operation will be automatically ended. Once
ended the aircraft may perform additional operations depending on the condition as indicated
below.
Low battery level: A message will pop up on the app screen telling you that the aircraft is
returning home automatically.
Critically low battery level: The operation will end and the aircraft will automatically land
on-site.
If the GPS signal strength is too weak, the Aircraft will enter the ATTI mode. In this case, the
operation will be ended and you will return to manual pilot control.
Autel Robotics 2020 All Rights Reserved.