User manual

Route Settings
Click the icon
to enter route settings, the page is shown below:
45
Height – Indicates the common elevation for all waypoints.
Speed – Indicates the common speed for flight.
Heading
Route – The aircraft turns towards the next waypoint (default). Individual waypoints can
override the heading direction as required.
Free – User controls the aircraft heading using the remote control.
Custom – User can set route direction of each waypoint.
Go Home – Return and lands at the take-off location.
Hover – Hover at the location and altitude of the last waypoint.
6.4.3 Area Route
The mission planner includes 2 types of area route planning. The Rectangle creates a rectangular
flight area while the Polygon allows for the creation of a contouring flight area.
The one you chose should correspond to the shape and contours needed for your specific operation
and location.
Settings for both Rectangle and Polygon are identical and are covered in the Area Route Configuration
section below.
Finish Action
Autel Robotics 2020 All Rights Reserved.