User manual

Table Of Contents

Waypoint Action – When set to “Hover” the aircraft will pause and complete any configured

camera actions (see Camera Actions below). If “Fly Over” is selected the

aircraft will start the camera action at the waypoint but will not pause

until camera actions are complete.

Add Action – Tap the

button to create additional mission actions and allow separate

button heading and camera operations to be added to the waypoint. Tap the

to delete 1 mission action.

Height – Defines the aircraft elevation (above take-off point).

Speed – The speed the aircraft will travel. Individual speeds take effect from the selected aircraft

and are maintained until the next waypoint containing a different speed setting.

Action – A waypoint could include one waypoint action ( Flyover and Hover) and camera

actions. When the waypoint action is "Fly Over", it can only have one camera action.

When the waypoint action is hovering, it can include multiple camera actions.

Waypoint Settings

Camera Actions – Defines the operations the camera should take upon reaching the waypoint.

When Waypoint Action = “Fly Over”a.

Take Photo

– take one (1) photo as the aircraft flies through the waypoint.

Time Lapse – The camera will take a photo every ‘n’ seconds as indicated by the

“Time Lapse Interval”.

Distance Lapse – The camera will take a photo every ‘n’ distance as indicated by the

“Distance Interval”.

Record – Start/stop video recording.