User manual

Table Of Contents

5.11 Intelligent Photo Operations Control

All Intelligent photo operations can be paused or canceled at any time during the operation. If

paused, the operation remains active and the aircraft will hover in place. If need to cancel, you

can click the intelligent photography icon to switch back to manual flight.

To pause the operation, press the Pause button on the remote control for 1s or tap the Pause icon

on the screen of the Autel Explorer™ app.

Pause Operation

If any of the following conditions are detected the Intelligent Photo operation will be automatically

ended. Once ended the aircraft may perform additional operations depending on the condition as

indicated below.

Low battery level: A message will pop up on the app screen, telling you that the aircraft is returning

home automatically.

Critically low battery level: The operation will end and the aircraft will automatically land on-site.

If the GPS signal strength is too weak, the Aircraft will enter into ATTI mode. In this case, the

operation will be ended and you will return to manual pilot control.

Automatic Cancel