User manual

Table Of Contents

Select My Location and tap SET to set your current location

as the center point.

Select Map Point, tap the displayed map to select a center

point, and then tap NEXT.

5.7 Gesture

Gesture control allows an individual, located in front of the aircraft, to perform simple

tasks using hand and arm motions. Gesture recognition requires a person to be

locked before recognizing the person’s actions such as taking photos or videos. At

the same time, when the person locked is moving, the aircraft will follow as well.

During the gesture recognition, you may also use the remote control to adjust the

distance and direction between the aircraft and the tracking target.

Select Aircraft Location and tap SET to set the current

aircraft location as the center point.

Tap the Settings icon in the upper right corner of the app screen to enter the Expert Mode. Follow

the steps below to create an Orbit mission:

Tap the drop-down box to select a center point of the orbit. There are 3 ways available for

selecting a center point:

Creating an Orbit Mission in Expert Mode

Set the altitude, radius, and flight direction of the Orbit mission. Specifically, enter values in the

Altitude and Radius input boxes and select CW (clockwise) or CCW (counter clockwise) from

the Flight Direction drop-down box. Then tap START to start the mission.

NOTES:

Tap How to Use Command Sticks for instruction on remote

control operation.

The Radius must be set between 10 to 100 m.

If you have configured Altitude Limit in Settings > Flight Control

(see Altitude Limit), the altitude of the Orbit mission will be

limited by this value.

NOTES:

Always maintain a safe distance from the aircraft when beginning operations to prevent injury or damage.