User manual

Table Of Contents

When setting an Orbit mission via Basic Settings, the aircraft location is the determining factor. Follow

the 3 steps below.

Tap SET to create a center point based on the current aircraft location.

Use the command sticks on the remote control to move the aircraft and increase the orbit radius. The

radius must be set between 10 m and 100 m. If the radius value is less than 10 m, a red number will

be displayed as shown in the figure.

Choose clockwise or counter clockwise as the flight direction. Then tap START to begin the mission.

Creating an Orbit Mission Using Basic Settings

Step 1: Step 2: Step 3:

After the aircraft takes off, increase the flight altitude to at least 10 m before using the Orbit function.

5.6.1 Setup and Start Orbit

NOTES:

On the SET or START button of the app screen, the capital "A" enclosed in the brackets stands

for the Customizable Button A on the back of the remote control. You can also press that button

to create the same setting.