User manual

Table Of Contents

5.5 Viewpoint

Viewpoint allows you to send the aircraft towards a selected destination using a touch

of the screen.

Follow the instructions in the Learning Center of the Autel Explorer™ app before

performing a Viewpoint mission for the first time. After closing the Learning Center,

you will see a horizontal line in the middle of the screen.

Tap above the horizontal line to make the Aircraft take off.

Tap below the line to make the Aircraft land.

The dotted red line along the bottom of the screen indicates a safety zone, below which

the aircraft will not land.

NOTES:

Before using this intelligent photo mode the aircraft must be in the air. Always maintain a safe

distance from the aircraft when beginning operations to prevent injury or damage.

The following procedure describes how to configure and start a Viewpoint mission.

Click the point to be viewed on the screen and the below screen will appear, which

indicates you can start a viewpoint flight.

Click the Start button and the aircraft will fly towards the viewed point.

5.5.1 Setup and Start Viewpoint