User manual

Table Of Contents

Aircraft automatically tracks the target at a fixed distance. The aircraft will try to maintain

the flight behind the target. If the target stops moving, the aircraft hovers until the target

starts moving again.

Dynamic Track allows you to highlight and mark moving objects using the mobile device.

Once marked and the operation started, the aircraft will track the object as it moves. The

aircraft will fly over and around objects automatically while maintaining track on the object.

Tracking status is indicated using color and on-screen information. The tracking rectangle

will change from green (tracking) to orange (partial loss of object) to red (target lost)

indicating the current state of the tracking operation.

EVO II's Dynamic Track is able to identify and track many types of objects for example:

5.2 Dynamic Track

People Boats Car Bicycles

NOTES:

The aircraft should stay in the air and keep a distance of 10-40ft (3-12 meters) from the

tracking target. When operating please keep a safe distance from the aircraft to avoid injury or

damage.

5.2.1 Setup and Start Dynamic Track

The first time you perform a Dynamic Track operation, it is suggested that you follow the on-screen

prompts. On-screen prompts display a step-by-step narrative for configuring Dynamic Track.

The following are the procedures for configuring and starting a Dynamic Track operation.

Locate the target on your screen and use your finger to draw a box around the target. The

target can also be automatically recognized; there will be a button on the target . Click the

button.