User manual

When the APP is opened, the default flight mode is Manual Flight which allows the user
to manually operating via remote control to take off, movement, and landing the aircraft.
When not being operated, the aircraft will hover in place. Under manual flight, the aircraft
will stop flying when it encounters obstacles when the vision system is on.
Switching to manual flight will stop other intelligent photography modes and exit the
original modes.
You can use the following three methods to let the aircraft take off:
Say “Take off” to your voice assistant.
Gesture controls allow you to control the ascent, descent, forward, backward, left,
right, and rotation of the aircraft. If you are using Mode 2, please refer to the below
picture, for others please go to settings-remote control- remote control mode to
adjust the settings.
5.1 Manual Flight
26
Autel Robotics 2020 All Rights Reserved.
Press and hold the take off/landing button on the remote control.
Push the command sticks to start as the below picture shows.