Product Manual

39
Chapter 5
Maintenance & Service
5.1 Firmware Upgrade
To optimize the performance of your EVO, Autel Robotics will provide rmware
updates on an ongoing basis. You can download the latest rmware in one
package from our ofcial website. When a rmware update is available, you will
receive a prompted on the Autel Explorer
TM
app after connecting it to the aircraft.
IMPORTANT
Before updating, make sure:
• The motors are not spinning.
• The battery levels of both EVO and the remote control are not less than
25%.
• There’s adequate space to store the rmware le on your camera’s
micro SD card.
 Downloading & upgrading the rmware
1. Download the all-in-one rmware upgrade package (with a .zip le extension)
from Autel Robotics’ ofcial website: www.autelrobotics.com.
2. Insert the SD card into your computer and extract the downloaded le (into
a .bin le extension) into your SD card. Then remove your SD card from the
computer.
3. Insert the SD card into the aircraft to start the upgrade process automatically.
You can check the real-time upgrade status displayed on the Flight
Information Panel.
4. Turn on the remote control and aircraft.
5. Reboot the remote control and aircraft before use.