Product Manual
37
Choose one of the following methods to shut down the motors after EVO reaches
the ground:
OR
WARNING
The toe-in action will always shut down the motors even if EVO is in midair.
Pay extra cautious and use this feature only in an emergency.
Automatic Landing
Press the Take-off/Landing Button ( ) on the remote control to land the
aircraft automatically from its current hover position.
1. Navigate the aircraft to the target landing position.
2. Release the Command Sticks and let the aircraft hover.
3. Press and hold the Take-off/Landing Button ( ) for 2 seconds until you
hear a beep from the remote control.
4. The aircraft will descend, land and shut off its motors automatically. During
descent, you can adjust the aircraft position using the Right Command Stick.
TIPS
During the automatic descent process, you can regain control by pressing
the Pause Button ( ) on the remote control.
NOTE
• Automatic landing is also available in ATTI mode, but you should monitor
the attitude of the aircraft, as it may drift.
• When the Low Battery Warning (25%) is displayed — at which the
EVO rear LEDs will ash red and the remote control Power Button
( ) will turn solid yellow — return to a safe landing point as soon as
possible.
Push the Left Command Stick
to the bottom and hold for 2s
Hold both Command Sticks
toe-in for 2s