Product Manual
34
4. Start the motors and take off using the remote control.
5. Pilot the aircraft carefully.
6. Land the aircraft, then shut down the motors.
4.2.1 Motor Start & Aircraft Takeoff
NOTE
The aircraft will not take off if the battery level is 15% or lower.
Start the motors by holding both Command Sticks in position for 2 seconds:
OR
With the motors spinning, choose either of the following takeoff commands:
OR
If you command the aircraft to take off pressing the Take-off/Landing Button
( ), the aircraft will automatically ascend to a height of roughly 1.5 meters.
WARNING
The motors are hot after operation. Please handle with care.
4.2.2 Command Stick Controls (Mode 2)
Hold the Takeoff/Landing
Button for 2s
Push the Left Command
Stick slowly upward (Mode 2)