Product Manual

28
inputs), it is recommended to calibrate the remote control. You can calibrate your
remote control according to the following steps, or by using the mobile app (Refer
to the App Manual for more information).
1. Turn off the remote control. Press and
hold the Power Button ( ) and
Take-off/Landing Button ( )
simultaneously until the screen
appears as shown on the right. The
four crossed bars represent the left
and right Command Sticks. The
horizontal bar at the top is the Gimbal
Pitch Dial.
2. Release both Command Sticks
and the Gimbal Pitch Dial naturally
to the central position. The three
middle rounds on the remote control
calibration screen will be highlighted
successively.
3. Push and hold the Command Sticks
in every possible direction until you
hear a beep each time. Then turn
the Gimbal Pitch Dial clockwise
until you hear a beep, then again
counterclockwise.
4. Calibration is complete when all the
bars on the screen are highlighted.
3.2.4 Pairing the Aircraft & Remote Control
The remote control and aircraft come paired out of the box. When you need to
pair your EVO and remote control again — such as after pressing the Remote
Control Pairing Button on the aircraft — follow these steps: