Product Manual

27
 Positioning the Antennas
Vertically align the antennas in parallel with each other, as shown below.
3.2.2 Powering Up/Off the Remote Control
 Powering Up
Press and hold the Power Button ( ) for 2 seconds until you hear a short
beep. The Flight Information Panel will light up and cycle through an initial
verication test.
IMPORTANT
Always turn on the remote control rst before powering up the aircraft.
 Powering Off
Press and hold the Power Button ( ) for 2 seconds until you hear a short
beep.
IMPORTANT
Always power off the aircraft before turning off the remote control.
NOTE
When not connected to the aircraft, the remote control makes an alert
sound after 15 minutes of inactivity, and turns off automatically after 18
minutes.
3.2.3 Remote Control Calibration
If the Command Sticks are abnormal (For example, if the remote control falls on
the ground accidentally, or the aircraft’s ight direction does not match control
Strong Weak