Product Manual

2.1.4 Gimbal & Camera

 XI-5A Camera Gimbal

The camera gimbal is engineered to minimize camera vibration and provide

superior stability, with a controllable roll axis range of 0°~90°. The operating

temperature is maintained at -10°C~50°C (14°F~122°F).

When the aircraft is powered up, the gimbal will automatically perform a calibration

test. Use the diagram below to familiarize yourself with all the moving parts of the

gimbal.

① Vibration Absorber ④ Camera

② Yaw Motor

⑤ Filter

③ Roll Motor ⑥ Pitch Motor

IMPORTANT

• The EVO XI-5A Camera Gimbal is held in place with a gimbal holder to

protect the gimbal from the incidental rotation — and to avoid damage

when stored.

• Remember to remove the holder before powering up the aircraft.

Failure to do so may result in damage to the gimbal motors and

circuitry.